Planning Optimization Technology Study Cathodic Protection As Anti Corrosion On Subsea Pipelines
DOI:
https://doi.org/10.62012/collaborate.v1i2.35Keywords:
Anode, Corrosion, DNV GL, PipeAbstract
Subsea pipes are a tool for flowing water, oil and gas fluids. By using this underwater pipe installation, fluids can be transferred from one place to another, from a production unit to another production unit, from a storage unit to a processing unit, and from a process transferred to a storage unit. During the production process, safety must be guaranteed to avoid fatal damage such as anchor drag, sinking ships, nets or trawls and other factors such as pipe corrosion. To prevent corrosion in pipes, we need appropriate and practical solutions. We can prevent this from happening by conducting a literature study regarding the application of optimization planning for cathodic protection in pipes. The design and analysis process discusses cathodic protection analysis, which refers to the DNV GL-RP-F103 standard criteria. Additional discussion is carried out as an optimization step, namely analyzing the type of paint used based on DNVGL-RP-B401.
Downloads
References
Sadira, B., Windupranata, W., & Bachri, S. Identification And Classification Of Variables For Design Of Subsea Pipeline Locations And Routes.
Sulardi, S. (2020). Evaluation Of Damage To Subsea Pipelines And Repair Methods.Proceedings Snitt Poltekba, 4, 200-206.
Nanda, J. F., Dhanistha, W. L., & Silvianita, S. (2022). Risk Assessment Of Damage To PT's Subsea Pipeline. State Gas Company In Labuhan Maringgai-Muara Bekasi Due To Falling Anchors Using The Monte Carlo Method.ITS Engineering Journal, 11(2), G14-G19.
Siregar, T., Sitorus, E., Priastomo, Y., Bachtiar, E., Siagian, P., Mohamad, E.,& Yanti, Y. (2021).Corrosion And Its Prevention. We Write Foundation.
H. Palippui, “Analysis Of The Installation Of Subsea Pipelines To Support The Need For Clean Water In Supporting Tourism Development On Kayangan Island”, Journal of Maritime Technology and Society, vol. 1, no. 1, pp. 1-9, Feb. 2022.
Ridwan, M., Sulaiman, S., & Sugeng, S. (2021). The Effect Of Az91d Magnesium Alloy Anode On Galvanized Corrosion Patterns In Metal Immersed In Sea Water.Inovtek Polbeng, 11(2), 106-113.
Alida, R., & Abi Pratama, R. (2022). P Corrosion Prevention On The 28" Skg 10 Pmb-Benuang Flowline Using The Impressed Current Cathodic Protection (Iccp) Method Pt Pertamina Hulu Rokan Region 1 Zone 4 Field Prabumulih.Patra Academic Technical Journal, 13(01), 57-65.
Hermawan, H. (2019). Introduction To Cathodic Protection.
Alfaris, M. O. The Effect Of Cathode Surface Area Ratio On The Corrosion Rate Of A36 Steel Using The Cathodic Protection Method In Sea Water Media (Doctoral Dissertation).
Mulyono, Pribadi Ridzky. Design Of A Casual Anode Protection System For 5l Grade B Fire Steel Pipe With Varying Amount Of Coating Installed In The Soil, Sepuluh Nopember Institute Of Technology: Surabaya, 2017
SO 15589-2, "Petroleum, Petrochemical And Natural Gas Industries-Cathodic Protection Of Pipeline Transportation System -Part 2:Offshore Pipelines", International Organization For Standardization, Washington, DC, 2012.
DNV GL-RP F103, Cathodic Protection Of Submarine Pipelines, Det Norske Veritas Industry AS, Hovik, 2016.
H. Palippui, “Analysis Of The Installation Of Subsea Pipelines To Support The Need For Clean Water In Supporting Tourism Development On Kayangan Island”, Journal of Maritime Technology and Society, vol. 1, no. 1, pp. 1-9, Feb. 2022.
